Stainless steel reactor maintenance

Stainless steel reactor maintenance
1, the reactor in operation, should carefully check for anything abnormal, in normal operation, the board shall open the cover and touch the terminals to avoid electric shock.
2, the measuring instrument should be calibrated regularly to ensure the accuracy and reliability of reactor work.
3, the heating rate should not be too fast, slow pressure should be, especially the stirring speed, only slowly increases the speed. In case of power failure, should betransferred back to zero speed control knob.
4, no fast reactor cooling to prevent excessive thermal stress damage.
5, reactor operation, the coupling between the lid and kettle water jacket cooling water must pass in order to control the operating temperature magnet, to avoiddemagnetization.
6, is strictly prohibited under high pressure reactor beat twist connector bolts andnuts.
7, membrane reactor explosion in the use of a period of time, aging, fatigue willreduce the burst pressure may also be attached to the media, the impact of itssensitivity, should be changed regularly, usually once a replacement to preventfailure.
8, with a pressure reactor disassembly is prohibited.
9 reactor for the packing seal stuffing box seal leakage is found in severe (adjustedpacking gland can not be resolved), you should stop running until the pressure within the reactor pressure and lubrication after discharge, replace the packing.

More Information at Weihai Huanyu Chemical Machinery Reactor

...
Sources from Stainless steel reactor maintenance

Keywords: reactor, heat exchanger, pressure vessel